Melt & Pour Soap Base - Goat Milk

Melt & Pour Soap Base - Goat Milk

$11.20


Product Information
Specification

Our Goats Milk Melt & Pour Soap Base is an opaque soap with a smooth texture and rich creamy lather containing goats milk which is naturally high in vitamins and minerals and the moisturising properties of Vitamin E and butterfats.

Melt & Pour glycerine is soap is made with approx. 20 % white soap and 80% vegetable glycerine. The white soap originally has sodium hydroxide (lye is produced when sodium hydroxide is mixed with water) as an emulsifier (to bond the oils and the water).
The white soap is then cured for 3-4 weeks during which time the lye reacts with fatty acids and becomes inert. During the curing process the lye dissipates and the total residue in the final product is only approx. 0.1%.

Our Goat Milk Base is a white vegetable glycerine soap base that is formulated from gentle ingredients. This base has a creamy and luscious feel to it that lathers well and does not have a strong odour.

Getting Started:
1. Melt and Pour soap is already reasonably soft, so it doesn’t take long to melt, either in a microwave or over a double boiler on the stove. (Remember if you do not have access to a double boiler then a large saucepan part filled with water with a smaller pot resting on some forks in the bottom of the larger pot will suffice).
2. Colour is to be added at this stage. Food colours can be used if lighter shades are required, however too much will result in the final product staining your hands. For stronger coloured soaps oil soluble based colours are preferential.
3. During this step the scent is added. Both essential and fragrant oils can be used according to preference. The ratio can vary according to the potency of the oils and the desired end product (the essential oils being the strongest). We recommend that you try about 1 tablespoon per 500g of melt and pour soap.
4. At this stage you can customize your soap with various additives. We recommend you experiment with carrier oils (such as almond), or raw materials such as aloe vera, vitamin E, crushed plant material (jojoba or sandalwood) or ground pumice stone.
5. Pour your mixture into a mould (moulds can be as simple as a tupperware container or jelly mould) and leave to set.
6. Once your soap has hardened it is ready to use and enjoy!

Ingredients: Purified Water, Glycerin, Sodium Stearate, Sorbitol, Goat Milk, Propylene Glycol, Sodium Laureth Sulphate SLES, Stearic Acid, Lauric Acid, Sodium Chloride.

Product Code MELBIOA713
Condition New


This field is required.
Top

eCommerce by CubeCart